Specifications - Denon AVR-4520CI Owner's Manual

Specifications

n Audio section
• Power amplifier
Rated output: Front:
150 W + 150 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)
190 W + 190 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Center:
150 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)
190 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Surround:
150 W + 150 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)
190 W + 190 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Surround back / Front height / Front wide:
150 W + 150 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)
190 W + 190 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
170 W x 2ch (8 Ω)
Dynamic power:
280 W x 2ch (4 Ω)
Output connectors: 4 – 16 Ω
• Analog
Input sensitivity/Input impedance: 200 mV/47 kΩ
Frequency response: 10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
S/N: 102 dB (IHF–A weighted, DIRECT mode)
0.005 % (20 Hz – 20 kHz) (DIRECT mode)
Distortion:
Rated output: 1.2 V
• Digital
D/A output: Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Digital input: Format — Digital audio interface
• Phono equalizer (PHONO input — MEDIA PLAYER OUT)
Input sensitivity: 2.5 mV
RIAA deviation: ±1 dB (20 Hz – 20 kHz)
S/N: 74 dB (IHF–A weighted)
Rated output: 150 mV
Distortion factor: 0.03 % (1 kHz, 3 V)
DVD
n Video section
• Standard video connectors
Input/output level and impedance:
Frequency response:
• Color component video connector
Input/output level and impedance:
Frequency response:
n Tuner section
(ANTENNA input – MEDIA PLAYER OUT)
Receiving Range:
Usable Sensitivity:
S/N (IHF–A weighted):
Distortion (1 kHz):
n Switching hub
Standard
Number of ports
n General
Power supply:
Power consumption:
Power consumption in standby mode: 0.1 W
Power consumption in CEC standby
mode:
Power consumption in network
standby mode:
For purposes of improvement, specifications and design are subject to change without notice.
202
1 Vp-p, 75 Ω
5 Hz – 10 MHz — 0, –3 dB (when "Video Conversion" set to "Off")
Y signal — 1 Vp-p, 75 Ω
P / C signal — 0.7 Vp-p, 75 Ω
B B
P / C signal — 0.7 Vp-p, 75 Ω
R R
5 Hz – 60 MHz — 0, –3 dB (when "Video Conversion" set to "Off")
[FM]
(Note: μV at 75 Ω, 0 dBf = 1 x 10 –15 W)
87.5 MHz – 107.9 MHz
1.5 μV (14.8 dBf)
MONO 78 dB
STEREO 68 dB
HD 85 dB
MONO 0.1 %
STEREO 0.2 %
HD 0.02 %
IEEE 802.3 (10 Base-T)-compliant
IEEE 802.3u (100 Base-TX)-compliant
4 ports
AC 120 V, 60 Hz
780 W
0.5 W
5.1 W
[AM]
530 kHz – 1710 kHz
20 μV
85 dB
0.02 %