Denon AVR-4520CI Owner's Manual page 169
Integrated network av receiver
Hide thumbs
Also See for AVR-4520CI:
- Service manual (281 pages) ,
- Model information (19 pages) ,
- Getting started manual (11 pages)
Table of Contents
Advertisement
Recording custom macro operations
1
RC SETUP
Press and hold
for at
least 3 seconds.
"SETUP" and
indicator flashes twice
on the remote control unit.
2
Use
ui
to display "MACRO" on
the remote control unit and press
ENTER
.
3
Use
ui
to display "MAN" on
the remote control unit and press
ENTER
.
4
When "MCNo" appears on the
remote control unit, press the
MACRO A – D
button that you
want to store.
5
Press the buttons to be stored one
by one.
• The step number for the storing procedure and mode are alternately
displayed on the remote control unit.
NOTE
ZONE SELECT
You cannot store the macros for the
6
MACRO
Press
to exit the macro function.
"OK" flashes four times on the remote control unit and the
normal operation mode is restored.
DVD
Adjusting the interval time of macro
operations transmitting
The macro operation transmission interval can be adjusted.
• The factory setting is "0.5 sec".
1
Press and hold
least 3 seconds.
"SETUP" and
indicator flashes twice
on the remote control unit.
2
ui
Use
to display "MACRO" on
the remote control unit and press
ENTER
.
3
ui
Use
to display "MAN" on
the remote control unit and press
ENTER
.
4
When "MCNo" appears on the
remote control unit, press the
MACRO A – D
want to set.
5
RC SETUP
Press
button.
6
Use
ui
to set the macro operation transmission
interval and press
"OK" flashes four times on the remote control unit and the
normal operation mode is restored.
Remote control unit
display
0.25
0.50
0.75
1.00
1.25
RC SETUP
for at
button that you
.
ENTER
.
Time values that you can set
0.25 sec
0.5 sec
0.75 sec
1 sec
1.25 sec
166
Operating macro function
Using the macro function
MACRO A – D
Press the
button you
used to store the macro function.
Resetting the macro function
1
Press and hold
RC SETUP
for at
least 3 seconds.
"SETUP" and
indicator flashes twice
on the remote control unit.
2
Use
ui
to display "RESET" on
the remote control unit and press
ENTER
.
3
ui
Use
to display "MACRO" on
the remote control unit and press
ENTER
.
4
When "MCNo" appears on the
remote control unit, press the
MACRO A – D
button that you
want to reset.
"RESET" flashes four times on the
remote control unit and the normal
operation mode is restored.
Advertisement
Table of Contents
