Denon AVR-4520CI Owner's Manual page 182

n When "7.1ch + ZONE2/3-MONO" is selected for "Assign Mode"
Assigns power amplifiers within this unit as follows: 7.1ch for MAIN ZONE and 1ch for ZONE2 and ZONE3 each.
Select the desired speakers used for MAIN ZONE from the "Main Speakers" settings.
Output signal
S.Back/F.Height
Main Speakers S.Back/F.Wide
F.Height/F.Wide
Output signal
S.Back/F.Height
Main Speakers S.Back/F.Wide
F.Height/F.Wide
Audio is output from the optimum speakers based on the selected sound mode.
n When "7.1ch(Bi-Amp)" is selected for "Assign Mode"
Assigns power amplifiers within this unit as follows: 7.1ch for MAIN ZONE and 2ch for the front speaker bi-amplifier connection.
Select the desired speakers used for MAIN ZONE from the "Main Speakers" settings.
FL
Output signal
S.Back/F.Height FL
Main Speakers S.Back/F.Wide FL
F.Height/F.Wide FL
FL
Output signal
S.Back/F.Height FL
Main Speakers S.Back/F.Wide FL
F.Height/F.Wide FL
DVD
Speaker terminal
FL FR C SL SR
FL FR C SL SR
FL FR C SL SR
FL FR C SL SR
FL FR C SL SR
FL FR C SL SR
FL FR C SL SR
FL FR C SL SR
FR C SL SR
FR C SL SR
FR C SL SR
FR C SL SR
FR C SL SR
FR C SL SR
FR C SL SR
FR C SL SR
SBL SBR FHL FHR FWL
SBL SBR FHL FHR Z2 MONO Z3 MONO
SBL SBR Z2 MONO Z3 MONO FWL
Z2 MONO Z3 MONO FHL FHR FWL
Pre out terminal
SBL SBR FHL FHR FWL
SBL SBR FHL FHR –
SBL SBR – – FWL
– – FHL FHR FWL
Speaker terminal
SBL SBR FHL FHR
SBL SBR FHL FHR
SBL SBR FL (Bi-amp) FR (Bi-amp)
FL (Bi-amp) FR (Bi-amp) FHL FHR
Pre out terminal
SBL SBR FHL FHR FWL
SBL SBR FHL FHR –
SBL SBR – – FWL
– – FHL FHR FWL
179
Relationship between the Amp Assign mode settings and audio output
FWR
FWR
FWR
FWR SW1 SW2 Z2L Z2R
– SW1 SW2 Z2 MONO Z2 MONO Z3 MONO Z3 MONO
FWR SW1 SW2 Z2 MONO Z2 MONO Z3 MONO Z3 MONO
FWR SW1 SW2 Z2 MONO Z2 MONO Z3 MONO Z3 MONO
FWL FWR
FL (Bi-amp) FR (Bi-amp)
FWL FWR
FWL FWR
FWR SW1 SW2 Z2L Z2R
– SW1 SW2 Z2L Z2R
FWR SW1 SW2 Z2L Z2R
FWR SW1 SW2 Z2L Z2R
Z3L Z3R
Z3L Z3R
Z3L Z3R
Z3L Z3R
Z3L Z3R
v See overleaf