Denon AVR-4520CI Owner's Manual page 190

n Types of input signals, and corresponding sound modes
This table shows the input signal that can be played in each sound mode. Check the audio signal of the input source then select the sound mode.
Symbols in the table
F This indicates the default sound mode.
S This indicates the selectable sound mode.
Sound Mode (vpage 84) NOTE
DTS SURROUND
DTS-HD MSTR z1
z1
DTS-HD HI RES
DTS ES DSCRT6.1 z2
DTS ES MTRX6.1 z2
DTS SURROUND z1
DTS 96/24 z1
DTS (–HD) + PLgx Cinema z3
DTS (–HD) + PLgx Music z2
DTS (–HD) + PLgz z4
DTS EXPRESS z1
DTS (–HD) + NEO:X Cinema
DTS (–HD) + NEO:X Music
DTS (–HD) + NEO:X Game
z1
DTS NEO:X Cinema
DTS NEO:X Music z1
DTS NEO:X Game z1
Audyssey DSX ®
z1 If "Audyssey DSX ® " (vpage 126) is set to "Wides/Heights", "Heights" or "Wides", the Audyssey DSX ® effect is added to the sound mode marked with z1.
z2 If "Speaker Config." – "Surr. Back" (vpage 142) is set to "None", this sound mode cannot be selected.
z3 If "Speaker Config." – "Surr. Back" (vpage 142) is set to "1spkr" or "None", this sound mode cannot be selected.
z4 If "Speaker Config." – "Front Height" (vpage 142) is set to "None", this sound mode cannot be selected.
DVD
PCM DTS-HD
DTS-HD
DTS-HD
ANALOG
PCM PCM High
Master
(multi ch) (2ch) Resolution
Audio
Audio
F
F
S S
S S
S S
S S
S S
S S
S S
S S
S S
S S
Input signal types and formats
DTS
DTS ES DTS ES
DTS DTS DTS
DSCRT MTRX
EXPRESS (5.1ch) 96/24
(With Flag) (With Flag)
F
F
S S F
F
S S S
S S S
S S S S S
F
S S S S S
S S S S S
S S S S S
S S S S S
187
DOLBY DOLBY DIGITAL
DOLBY
DOLBY DOLBY DOLBY
DOLBY DIGITAL EX
DIGITAL DIGITAL EX DIGITAL
TrueHD (With no
Plus (With Flag) (5.1ch)
Flag)
Surround
Super Audio CD
DOLBY
DSD DSD
DIGITAL
(multi ch) (2ch)
(2ch)
S
S
S
v See overleaf