Denon AVR-4520CI Owner's Manual page 151

Settings
Make settings for wired LAN.
Only set "Settings" when connecting to a network without a DHCP function.
Network
Information
Network
Friendly Name
Settings q
Diagnostics
Maintenance Mode
Selects how configure the network settings
q On the menu, select "Network" – "Settings" and press
ui ENTER
w Use to select "DHCP", then press
o p ENTER
e Use to select "Off", then press
ui
r Use to select "IP Address", then press
• IP Address : Set the IP address within the ranges shown below.
The Network Audio function cannot be used if other IP addresses are set.
CLASS A: 10.0.0.1 – 10.255.255.254
CLASS B: 172.16.0.1 – 172.31.255.254
CLASS C: 192.168.0.1 – 192.168.255.254
uio p 0 – 9
t Use or to input the address and press
ui
y Use to select setting item, then press
• Subnet Mask : When connecting an xDSL modem or terminal adapter
directly to this unit, input the subnet mask indicated in the documentation
supplied by your provider. Normally input 255.255.255.0.
• Default Gateway : When connected to a gateway (router), input its IP address.
• Primary DNS, Secondary DNS : If there is only one DNS address indicated in the documentation
supplied by your provider, input it at "Primary DNS". If two or more DNS are provided by your
provider, enter both "Primary DNS" and "Secondary DNS".
DVD
Default settings are underlined.
Setting details
e
Network/Settings
w
DHCP Off
-IP Address 192.168.000.001
-Subnet Mask 255.255.255.000
r
-Default Gateway 255.255.255.000
-Primary DNS 000.000.000.000
u
-Secondary DNS 000.000.000.000
Proxy Off
-Address o 000.000.000.000
-Port 00000
Save Q1
Q0
Cancel
Configure the network settings manually
ENTER
.
.
.
ENTER
.
ENTER
.
ENTER
.
ui
u Use to select "Proxy" and press
• Proxy : Make this setting when connecting to the Internet via a proxy server.
Make the proxy settings only when you connect to the Internet via a proxy server that is on your
internal network or provided by your provider, etc.
o p
i Use to select "On(Address)" or "On(Name)", and then press
On(Address) : Select when inputting by address.
On(Name) : Select when inputting by domain name. Up to 38 characters can be input.
t
i
o Press to select "Address" or "Name", then press
When "Address" is selected in step i : Use
y
ENTER
press .
When"Name" is selected in step i : Use the software keyboard (vpage 118) to enter the domain
i
name, and select
O K
• For character input, see page 118.
i
Q0 Press to select "Port", then press
ENTER
number and press .
Setup is complete.
i
Q1 Press to select "Save", then press
The display returns to the original screen.
• If you are using a broadband router (DHCP function), there is no need to make the settings at "IP
Address" and "Proxy", since the DHCP function is set to "On" in this unit's default settings.
• If this unit is being used connected to a network without the DHCP function, the network settings
must be made. In this case, some knowledge of networks is required. For details, consult a network
administrator.
• If you cannot connect to the Internet, recheck the connections and settings (vpage 31).
• If you do not understand about Internet connection, contact your ISP (Internet Service Provider) or the
store from which you purchased your computer.
• When you want to cancel the setting during IP address input, select "Cancel", then press
148
Setting details
ENTER
.
ENTER
ENTER
.
uio p 0 – 9
or to enter the proxy server address, and
.
ENTER uio p 0 – 9
. Use or to input the proxy server port
ENTER
.
Network
.
ENTER
.