Connections; Important Information - Denon AVR-4520CI Owner's Manual

Connections

Important information

Make connections before using this unit.
To create a home theater that can play back higher quality video and audio by fully utilizing the
capabilities of this unit and your video devices, connect this unit to each of your video devices with
HDMI cables.
n HDMI-compatible device
If your video device does not support HDMI connections, use the following connection.
n HDMI-incompatible device
This unit can change the source that is assigned to the DIGITAL AUDIO IN, ANALOG AUDIO IN,
COMPONENT VIDEO IN and VIDEO IN connectors.
For details on assigning a source to connectors, see "Changing the source assigned to connectors"
(vpage 15). For the setting method, see "Input Assign" (vpage 135).
NOTE
• While signals are being upscaled to 4K, the menu screen is only displayed on a TV that is connected
to this unit via HDMI.
• Do not plug in the power cord until all connections have been completed. However, when the
"Setup Assistant" is running, follow the instructions in the "Setup Assistant" (C page 7) screen
for making connections. (During "Setup Assistant" operation, the input/output connectors do not
conduct current.)
• When running the "Setup Assistant" (C page 7), turn off the power supply of connected devices.
• When making connections, also refer to the operating instructions of the other devices being connected.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Do not bundle power cords together with connection cables. Doing so can result in noise.
DVD
n HDMI-compatible device
vpage 10
vpage 12
vpage 12
n HDMI-incompatible device
vpage 16
vpage 19
vpage 22
vpage 26
n Others
vpage 93
6
vpage 12 vpage 12
vpage 12 vpage 12
vpage 17 vpage 18
vpage 20 vpage 21
vpage 23 vpage 25
vpage 27 vpage 31
vpage 32