Picture Adjust; Hdmi Setup - Denon AVR-4520CI Owner's Manual

Picture Adjust

Picture quality can be adjusted.
We recommend leaving the settings unchanged from the default settings. First adjust the display image
quality on your TV, and use this menu only when you want to make fine adjustments.
• This item can be set when the input source is CBL/SAT
MEDIA PLAYER iPod/USB NETWORK .
• With input sources other than the ones above, this item can be set when "Video Select" is selected. In
this case, the original input source settings are called out.
• Can be set when the "Video Conversion" setting (vpage 131) is "On".
• "TV AUDIO" or "CD" can be set when "HDMI", "COMP" or "VIDEO" (vpage 135, 136) has been
assigned.
Setting items
Picture Mode Standard : The standard mode suited for most living room viewing
Select the desired picture environments.
mode according to the video Movie : A mode suited for watching movies in a dark room such as a
signals and your viewing theater room.
environment. Vivid : A mode that makes graphic images for games, etc. brighter and
more vivid.
Streaming : A mode suited for low bit rate video sources.
Custom : Adjusts the picture quality manually.
Off : No picture quality adjustment is done with this unit.
• You can also press
(vpage 80) in the option menu.
• The default settings are as follows.
• For "Network" and "iPod/USB" input sources : Streaming
• For input sources other than "Network" and "iPod/USB" : Off
Contrast –6 – +6 (0)
Adjust picture contrast.
"Contrast" can be set when "Picture mode" is set to "Custom".
Brightness 0 – +12
Adjust picture brightness.
"Brightness" can be set when "Picture mode" is set to "Custom".
Saturation –6 – +6 (0)
Adjust picture chroma level
"Saturation" can be set when "Picture mode" is set to "Custom".
(saturation).
Hue –6 – +6 (0)
Adjust green and red
"Hue" can be set when "Picture mode" is set to "Custom".
balance.
DVD
Default settings are underlined.
DVD Blu-ray GAME AUX1
Setting details
OPTION
to make these settings from "Picture Mode"
Setting items
Noise Reduction Low / Medium / High / Off
Reduce overall video noise.
Enhancer 0 – +12
AUX2
Emphasize picture contours.
• "Picture Adjust" can not be set when 4K signals are input.
• When TVs are simultaneously connected to HDMI MONITOR OUT 1, HDMI MONITOR OUT 2,
COMPONENT VIDEO OUT and VIDEO MONITOR OUT connector for inputting video or component
video signals, the "Picture Mode" – "Streaming", "Noise Reduction" and "Enhancer" settings are only
valid for the TV that is connected via HDMI.

HDMI Setup

Make settings for HDMI video/audio output.
Setting items
Auto Lip Sync On : Compensated.
Make automatic Off : Not compensated.
compensation for timing
shift in audio and video
output.
HDMI Audio Out AVR : Play back through speakers connected to the unit.
Select HDMI audio output TV : Play back through TV connected to the unit.
device.
• The audio signal input from the HDMI input connector can be output as
an output signal from the HDMI output connector by setting the HDMI
audio output destination to TV.
Audio signals input via the Analog/Coaxial/Optical/EXTERNAL.IN input
connectors cannot be output from the HDMI output connector.
• When the HDMI control function is activated, priority is given to the TV
audio setting
129
Setting details
"Noise Reduction" can be set when "Picture mode" is set to
"Custom".
"Enhancer" can be set when "Picture mode" is set to "Custom".
Default settings are underlined.
Setting details
(vpage 102 "HDMI control function").
Video
v See overleaf