Version Display Mode - Denon DRA-100 Service Manual

3. Version Display Mode
The unit functions normally. The item "Version" is added to the menu.
3.1. Starting up
Press and hold the power operation button " X " before inserting the AC plug, then insert the AC plug while holding down
the button and wait for more than 3 seconds.
Select "Version Check" using "CURSOR d " and "CURSOR f ", then press the "Enter" button to select.
Startup display
"Version" is displayed for 5 seconds.
3.2. Display Order
q System μ -com Version → w System μ-com (Boot Loader) Versio
→ e Network u-com (Boot Loader) Version → r Network u-com (image) Version
→ t FPGA Version → y Bluetooth Mac Address → u Touch Sensor Version
Select "Version" in the "Setup".
q System μ -com Version ：
w System μ -com (Boot Loader) Version ：
e Network u-com (Boot Loader) Version ：
Press "Enter" button.
Press "CURSOR f " button.
Press "CURSOR f " button.
Press "CURSOR f " button.
20