Connecting To A Home Network (Lan) - Denon AVR-4520CI Owner's Manual

Connecting to a home network (LAN)

You can connect this unit to your home network (LAN) to perform various types of playbacks and operations
as follows. This unit is also equipped with a switching hub function. Make network connections for this unit
by carefully reading information on this page.
• Playback of network audio such as the Internet Radio and Media Servers
• Playback of music from online services
• AirPlay
• Operations on this unit via the network
In addition, when an updated firmware becomes available for improving this unit, the update information is
delivered from us to this unit over the network. You can then download the latest firmware.
For more information, on the menu, select "Update" (vpage 154).
Network settings are necessary. See "Network" on the menu
network setting.
Modem
Internet
To WAN side
Router
The figure above is an example. Connect the LAN cable to any of the NETWORK connectors from 1 – 4.
For connections to the Internet, contact an ISP (Internet Service Provider) or a computer shop.
DVD
(vpage 146) for more information on
NAS
(Network Attached
Storage)
PC
LAN port/ LAN port/
Ethernet Ethernet
connector connector
To LAN port
To LAN port
Required system
n Broadband internet connection
n Modem
Device that connects to the broadband circuit and conducts communications on the Internet.
A type that is integrated with a router is also available.
n Router
When using this unit, we recommend you use a router equipped with the following functions:
• Built-in DHCP server
This function automatically assigns IP addresses on the LAN.
• Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or
greater.
NOTE
• Connect the router to one of the NETWORK connectors on this unit. Furthermore, do not use more than
2 LAN cables when connecting this unit with a router.
• When connecting a hub to this unit, connect using just 1 LAN cable per hub. Connecting with two or
more LAN cables may cause a malfunction.
• To use a NETWORK connector as a hub, set "Network" (vpage 147) in the menu to "Always On"
(default).
• The loop detection function is not provided.
• Do not connect in the following ways.
Router
31
Router
Switching
hub
v See overleaf