Video Output; Video Connection - Denon AVR-4520CI Owner's Manual

w Zone playback by audio output (PRE OUT)
n Audio connections (ZONE2, ZONE3)
The audio signals of this unit's ZONE2 and ZONE3 audio output terminals are output to the ZONE2 and
ZONE3 amplifiers and played on these amplifiers.
ZONE2
Power
amplifiers
AUX IN
R L
We recommend using high quality pin-plug cables for audio connections in order to prevent noise.
NOTE
In ZONE2 or ZONE3, the digital audio signals input from the HDMI, COAXIAL or OPTICAL connector
cannot be played back. When playing back in ZONE2 or ZONE3, make an analog connection, network or
iPod/USB.
DVD
Audio output
ZONE3
Power
amplifiers
AUX IN
MAIN ZONE
This unit
R L

Video output

Video Connection

The video signals of this unit's ZONE4 video output connector are played by the ZONE4 TV.
MAIN ZONE
This unit
The video signals of this unit's ZONE2 video output connector are played by the ZONE2 TV.
MAIN ZONE
This unit
• When "Analog Video Out" (vpage 132) in the menu is set to "ZONE3", you can use the COMPONENT
VIDEO OUT and the VIDEO MONITOR OUT connectors in MAIN ZONE for ZONE3.
• To enable the HDMI control for the ZONE4 HDMI monitor, set "Control Monitor"
"ZONE4".
112
ZONE4
HDMI
IN
TV
ZONE2
TV
VIDEO
IN
or
CONPONENT
VIDEO IN
(vpage 130) to