Denon AVR-4520CI Owner's Manual page 143

Steps for setting "Amp Assign"
This unit is provided with 12 types of Assign Mode settings.
You can switch the channels assigned to a power amplifier in accordance with your speaker system or perform playback using up to 11.1 channels using a combination of the built-in power amplifier and an external
power amplifier. You can also use this unit as a preamplifier.
Use the following flowchart to set the speaker system of this unit.
9.1ch 9.1ch/2ch
(SB/FH/FW) Front
"Main Speakers" Settings
Select the speaker terminal from which to
output the signals assigned to the power
amplifiers for MAIN ZONE.
S.Back/ F.Height/
F.Height FWide
S.Back/
F.Wide
9.1ch
(5.1+SB+FH) 9.1ch 9.1ch
(5.1+SB+FW) (5.1+SB+FH) (5.1+SB+FW)
(5.1+FH+FW)
DVD
"Assign Mode" Settings
Select the method for using a power amplifier in accordance with your speaker system.
7.1ch + 7.1ch
ZONE2 (Bi-Amp)
7.1ch +
7.1ch +
ZONE2/3-
Front B
MONO
"Main Speakers" Settings
Select the speaker terminal from which to
output the signals assigned to the power
amplifiers for MAIN ZONE.
S.Back/ F.Height/
F.Height FWide
S.Back/
F.Wide
7.1ch 7.1ch 7.1ch
9.1ch
(5.1+SB) (5.1+SB) (5.1+FH)
(5.1+FH+FW)
(5.1+FH) (5.1+FW) (5.1+FW)
Maximum number of channels that can be used for the MAIN ZONE audio.
7.1ch/2ch 5.1ch
Discrete
Front (Bi-Amp) +
11.1ch
(Bi-Amp) ZONE2
5.1ch +
ZONE2/3
"Main Pre-amps" Settings
Select a channel that uses the PRE OUT
connector.
Front
11.1ch
7.1ch
5.1ch (9.1 + Front
(5.1+SB)
(PRE OUT))
140
Pre
Amplifier
Front
Height
"Pre-amp Assign" Settings
Select how to set the Channel used as PRE
OUT.
All Custom
11.1ch
11.1ch
(9.1 + Front Height
(PRE OUT)
(PRE OUT))
Speakers
Custom
11.1 ch