On Screen Display - Denon AVR-4520CI Owner's Manual

On Screen Display

Select the on-screen display user interface preferences.
Setting items
Bottom : Display at the bottom.
Volume
Sets where to display the Top : Display at the top.
master volume level. Off : Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to "Top".
Info On : Turn display on.
Displays status of operation Off : Turn display off.
temporarily when the sound
mode is changed, or input
source is switched. You
can set whether or not to
show each of these status
displays.
Now Playing Always On : Show display continuously.
Sets how long each menu Auto Off : Show display for 30 seconds after operation.
is displayed when the input
source is "NETWORK",
"iPod/USB", or "HD Radio".
DVD
Default settings are underlined.
Setting details
133
TV Format
Set the video signal format to be output for the TV you are using.
Setting items
NTSC : Select NTSC output.
Format
PAL : Select PAL output.
"Format" can also be set by the following procedure. However, the menu
screen is not displayed.
1. Press and hold the main unit's
"zVideo Format < NTSC >" appears on the display.
2. Use the main unit's
3. Press the main unit's
NOTE
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Video
Default settings are underlined.
Setting details
o p
for at least 3 seconds.
o p
and set the video signal format.
ENTER
to complete the setting.