Denon AVR-4520CI Owner's Manual page 99

Multi-channel + 2-channel connection
You can connect the other front speakers for 2-channel playback using
the DIRECT mode or STEREO mode.
The speakers used exclusively for multichannel playback and the speakers
used exclusively for 2-channel playback are automatically switched for
playback in accordance with the surround mode.
In this case, set "Assign Mode" to "9.1ch/2ch Front" in steps 3 to 5 for
"Set up "Amp Assign"" (vpage 99).
Front speakers can be used separately, depending on the speaker's
specifications or playback source such as front speakers (FL/FR) for
multichannel playback and front speakers (FL'/FR') for 2-channel playback
(vpage 145 "Front Speaker").
NOTE
• For speaker cable connections, see page 93.
• For speaker impedance , see page 93.
Multi channel playback
(Surround mode)
Switching
2-channel playback
(Direct/Stereo mode)
DVD
FHL
FL' FL
SL
When using a front wide speaker, you can connect a second front speaker to the connectors on the
diagram. To make connections for these connectors, set "Main Speakers" (vpage 100).
96
FHR
FR FR'
C
SW
SR
SBL SBR
Speaker connection
part in the connection