Playback; Sleep Timer Function - Denon AVR-4520CI Owner's Manual

Playback

1
ZONE SELECT
Press to switch the
zone mode.
K L
The , or indicator lights.
2
POWER X
Press to turn on the
ZONE2, ZONE3 or ZONE4
power.
• Also press input source select button when
in standby mode, the power turns on.
POWER X
• When is pressed, ZONE2,
ZONE3 or ZONE4 turns off.
• Power in ZONE2, ZONE3 or ZONE4 can
ZONE2 ON/
be turned on or off by pressing
OFF ZONE3 ON/OFF ZONE4 ON/OFF
, or on
the main unit.
3
Press the input source select button to select the input
source to be played.
The audio and video signal of the selected source is output to
ZONE2, ZONE3 or ZONE4.
SOURCE SELECT ZONE/REC SELECT
• Turn after pressing
main unit to select an input source.
When power for both MAIN ZONE and ZONE2 (ZONE3 or ZONE4) is
set to ON, power of the MAIN ZONE only can be turned off. Select
POWER X
MAIN ZONE in step 1 then press .
DVD
Adjusting the volume
VOLUME df
Use to adjust the volume.
GAdjustable rangeH
(When the "Scale" (vpage 124) setting is "0 – 98")
GAdjustable rangeH – – –
(When the "Scale" (vpage 124) setting is "–79.5dB – 18.0dB")
• At time of purchase, "Volume Limit"
(–10dB)".
Input source
select buttons
MASTER VOLUME
Turn
unit to adjust the sound volume.
NOTE
For ZONE4, you cannot use
Turning off the sound temporarily
on the
MUTE :
Press .
The sound is reduced to the level set at "Mute Level" (vpage 151)
in the menu.
• To cancel, either adjust the volume or press
• The setting can also be cancelled by adjusting the volume or turning
off the ZONE2 or ZONE3 power.
• You can adjust the tone and volume for ZONE2 or ZONE3 in "ZONE2
Setup" or "ZONE3 Setup" (vpage 151) in the menu.
• The All Zone Stereo function allows you to simultaneously enjoy in
multi-zones (ZONE2/ZONE3) the music that is played back in MAIN
ZONE during home party, etc.
function").
0 – 40 – 98
–79dB – –40dB – 18dB
(vpage 151) is set to "70
ZONE/REC SELECT
after pressing on the main
VOLUME df
to adjust the volume level.
MUTE :
again.
(vpage 80 "All Zone Stereo
113

Sleep timer function

• This is convenient for viewing and listening while going to sleep in
ZONE2, ZONE3 or ZONE4.
• The sleep timer function can be set by zone.
1
ZONE SELECT
Press to switch the
zone mode.
K L
The , or indicator lights.
2
SLEEP
Press and display the time
you want to set.
• The time switches as shown below each time
Off 10 min 20 30
120 100 90 80
110
To confirm the countdown time before putting the
unit to sleep
SLEEP
Press .
"Z2 Sleep : zmin", "Z3 Sleep : zmin" or "Z4 Sleep : zmin" appears
on the display.
z Countdown time
To cancel the sleep timer
SLEEP
Press to set "Off".
The sleep timer is also cancelled when this unit is set to the standby
mode or the ZONE2, ZONE3 or ZONE4 power is turned off.
NOTE
The sleep timer function cannot turn off the power of devices
connected to this unit. To turn off the power of those connected
devices, set up sleep timers on the connected devices themselves.
SLEEP
is pressed.
40 50
70 60