Surround Parameter; Subwoofer Level - Denon AVR-4520CI Owner's Manual

Dialog Enhancer
Adjusts and enhances the frequency band corresponding to the human voice at the center channel to
make the voice clearer.
Setting items
Enhancer Low / Medium / High : Enhances the human voice.
Off : Does not enhance the human voice.

Subwoofer Level

This setting adjusts the volume level for the subwoofer.
Setting items
Subwoofer 1 Level –12dB – +12dB (0dB)
This setting adjusts the
volume level for the
subwoofer 1.
Subwoofer 2 Level –12dB – +12dB (0dB)
This setting adjusts the
volume level for the
subwoofer 2.
Subwoofer On : The subwoofer is used.
Turn subwoofer output on Off : The subwoofer is not used.
and off.
NOTE
This can be set when the sound mode is "DIRECT" and "PURE
DIRECT" (vpage
"LFE+Main".
DVD
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
84) and the "Subwoofer Mode" (vpage

Surround Parameter

You can adjust the surround audio sound field effects to match your preferences.
The items (parameters) that can be adjusted depend on the signal being input and the currently set
sound mode. For details on the adjustable parameters, see "Sound modes and surround parameters"
(vpage 184).
NOTE
• Some setting items cannot be set while playback is stopped. Make the settings during playback.
• When the sound mode is "PURE DIRECT", you cannot set the surround parameters.
Setting items
Cinema EQ On : "Cinema EQ" is used.
Softens the treble range Off : "Cinema EQ" is not used.
of movie soundtracks for
better understanding.
Loudness Management On : Outputs using the settings made in "Dynamic Compression" and
This can be set in the "Dialogue normalization" (vpage 153) are enabled.
Dolby TrueHD mode. Off : "Dynamic Compression" settings and "Dialogue normalization" are
This sets whether to disabled, and the signals on the disk are output as is.
output as specified in
"Dynamic Compression"
or output directly without
compressing the dynamic
range of audio recorded in
the disc.
Auto : Automatic dynamic range compression on/off control according to
Dynamic Compression
Compress dynamic range source.
144) is
(difference between loud Low / Medium / High : These set the compression level.
and soft sounds). Off : Dynamic range compression always off.
Bass Sync 0ms – 16ms
For contents recorded in
multi-channel such as Blu-
ray discs, the recorded low
frequency effects (LFE) may
be out of synch and delayed.
This function corrects such
a delay of low frequency
effects (LFE).
121
Default settings are underlined.
Setting details
You can set "Auto" only for the Dolby TrueHD source.
How low frequency effects (LFE) are delayed differ according to the
disc. Set this to the desired value.
Audio
v See overleaf