Μcom/Dsp Version Display Mode - Denon AVR-4520CI Service Manual

1. µcom/DSP Version display mode
1.1. Operation specifications
µcom/DSP version display mode:
When the set is started up in this mode, the version information is displayed.
Starting up:
Press the "Power operation ( X )" button to turn on the power while pressing the "SETUP" and "OPTION" buttons.
Now, press the "OPTION" button to the display the 2nd item information on the FL Display.
b When the version is displayed on the FL Display, the version list is also displayed on the OSD.
1.2. Display Order
Error information(Refer to 1.3. Error display) → q Model destination information/Serial No. →
w Firmware Package Version → e Main µ-com/MAIN FBL(1st Boot Loader) Version → r Sub µ-com/Sub FBL →
t DSP1/DSP2/DSP3 version → y Audio PLD → u GUI SFLASH →
i Ethernet(DM860A) 1st Boot Loader, Hardware ID → o Ethernet(DM860A) 2nd Boot Loader →
Q0 Ethernet(DM860A) IMAGE → Q1 Ethernet(DM860A)MAC ADDRESS information →
Q2 HD RADIO SDK/HD RADIO BBP(AVR-4520CIE3 only) →
Q3 MultEQ Pro APP(Displayed when Audyssey Pro is complete) →
Q4 MultEQ Pro ICL(Displayed when Audyssey Pro is complete
q Model destination information/Serial No. :
A V R 4 5 2 0
Upper
Lower
S / N .
w Firmware Package Version :
F i r m .
Upper
Lower
e Main µ-com & MAIN FBL version :
M a i n
Upper
Lower
M a i n
r Sub µ-com & Sub FBL :
S u b
Upper
Lower
S u b
t DSP1/DSP2 ROM :
D S P 1
Upper
Lower
D S P 2
DSP3 ROM :
D S P 3
Upper
Lower
y Audio PLD :
A u d i o
Upper
Lower
u GUI SFLASH :
G U I
Upper
Lower
E 3
* * * * * * * * * *
P a c k a g e
V e r . : * * * *
: * * . * *
F B L : * * . * *
: * * * * * * * *
F B L : * * . * *
: * * . * *
: * * . * *
: * * . * *
P L D : * * . * *
: * * * * * * * *
25