Denon AVR-4520CI Owner's Manual page 154

Language
Set the language for display on the menu screen.
English / Français / Español
"Language" can also be set by the following procedure. However, the menu screen is not displayed.
Following the display content to make the setting.
o p
1. Press and hold the main unit's for at least 3 seconds.
"zVideo Format < NTSC >" appears on the display.
i
2. Press the main unit's and set "zGUI Language < ENGLISH >".
o p
3. Use the main unit's and set the language.
ENTER
4. Press the main unit's to complete the setting.
ZONE2 Setup / ZONE3 Setup
Set the audio to play back with multi-zone (ZONE2, ZONE3).
Setting items
Bass –10dB – +10dB (0dB)
Adjust bass tones.
Treble –10dB – +10dB (0dB)
Adjust treble tones.
High Pass Filter On : The low range is attenuated.
Make settings for cutting Off : The low range is not attenuated.
the low range to reduce
distortion in the bass.
Lch Level –12dB – +12dB (0dB)
Adjust the left channel
output level.
Rch Level –12dB – +12dB (0dB)
Adjust the right channel
output level.
DVD
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
Setting items
Channel Stereo : Select stereo output.
Set the signal output from Mono : Select monaural output.
multi-zone.
When "Assign Mode"
MONO", the "Channel" setting is automatically set to "Mono".
Volume Level Variable : Volume adjustment is enabled by main unit and remote control
Set the volume output level. unit.
40 (–40dB) : Fix volume at 40 (–40 dB). Set when adjusting volume by
external amplifier.
80 (0dB) : Fix volume at 80 (0 dB). Set when adjusting volume by external
amplifier.
When "Assign Mode"
"5.1ch + ZONE2/3", "7.1ch + ZONE2/3-MONO" or "5.1ch(Bi-
Amp) + ZONE2", the "Volume Level" setting is automatically set to
"Variable".
Volume Limit 60 (–20dB) / 70 (–10dB) / 80 (0dB)
Make a setting for Off : Do not set a maximum volume.
maximum volume.
This is displayed from –79 dB to 18 dB when "Scale" (vpage 124)
is set to "–79.5dB – 18.0dB".
Power On Volume Last : Use the memorized setting from the last session.
Define the volume setting Mute : Always mute when power is turned on.
that is active when the 1 – 98 (–79dB – 18dB) : The volume is adjusted to the set level.
power is turned on.
This is displayed from –79 dB to 18 dB when "Scale" (vpage 124)
is set to "–79.5dB – 18.0dB".
Mute Level Full : The sound is muted entirely.
Set the amount of –40dB : The sound is attenuated by 40 dB down.
attenuation when muting –20dB : The sound is attenuated by 20 dB down.
is on.
151
General
Setting details
(vpage 141) is set to "7.1ch + ZONE2/3-
(vpage 141) is set to "7.1ch + ZONE2",