Denon AVR-4520CI Owner's Manual page 42

n Subwoofer level error message and how to
adjust
The optimal level of each subwoofer channel for Audyssey Setup
measurement is 75 dB.
During subwoofer level measurement
speakers (Audyssey® Setup)"), an error message is displayed
when one level of subwoofers is outside the 72 – 78 dB range.
When using a subwoofer with built-in amplifier (active type), adjust
the subwoofer volume so that the subwoofer level is within the 72
to 78 dB range.
GError messageH
Audyssey Setup
Your Subwoofer 1's level is too high.
If your subwoofer has a volume control on it,
Select "SW Level Matching" to interactively adjust the level of
your subwoofer.
If your subwoofer does not have a volume control,
or if you do not want to use a subwoofer, select "Skip".
Back Skip SW Level Matching
DVD
1
Select "SW Level Matching" and
then press
Subwoofer level measurement begins.
During measuring, a "Calibrating..."
(vpage 33 "Set up
message is displayed.
The measured level appears on the level
indicator after about 3 to 5 seconds.
Red
• If the measured level is outside the 72 to 78 dB range, the level
indicator is red.
• When measuring finishes, select "Back" and then press
ENTER .
Audyssey Setup
Adjust the volume on your first subwoofer so that the level
below indicates 75dB
VOLUME
MIN
MAX
--.-dB
Calibrating...
Back Next
Audyssey Setup
Adjust the volume on your first subwoofer so that the level
below indicates 75dB
VOLUME
MIN MAX
60.0dB
Calibrating...
Back Next
ENTER
39
Set up speakers (Audyssey ® Setup)
2
Adjust the volume control on your subwoofer so that
the measured level is within the 72 to 78 dB range.
Audyssey Setup
Adjust the volume on your first subwoofer so that the level
below indicates 75dB
VOLUME
MIN MAX
75.0dB
Calibrating...
Green
Back
• If the measured level is within the 72 to 78 dB range, the level
indicator is green.
3
When the measured level is within the 72 to 78 dB
range, select "Next" and then press
• If you use two subwoofers, the second subwoofer's adjust will be
started.
Repeat the operation from step 2, 3.
When you use two subwoofers, adjust each subwoofer so that the
volume levels of Subwoofer 1 and Subwoofer 2 are appropriate for
your needs.
.
Next
ENTER
.