Remote Control - Denon AVR-4520CI Owner's Manual

n Remote control operation modes
By default, the input source select buttons on the remote control perform only the input source select
operation. To operate an external device with this remote control, set the preset code in "List of preset
codes" (vpage 205) for the device you want to register to each input source select button.
For how to set preset codes to buttons, see "Registering preset codes" (vpage 157).
If you register preset codes on this remote control, the input source select buttons on the remote
control can perform the following two functions.
q The function to switch input sources on this unit (AVR operation mode)
w The function to make this remote control switch to the mode in which you can operate the device
registered to the button (External device operation mode)
n How to switch operation modes
Press the input source
select button.
q AVR operation
z1
mode
AVR
Press
z1 The mode in which you can operate this unit.
z2 If you press one of these buttons , the input source on this unit changes and the remote control
switches to the mode in which you can operate the external device registered to that button.
DVD
w External device
z2
operation mode
.
Input source
select buttons
n Devices that can be registered to input source select buttons on the

remote control

The types of devices that can be registered to each input source select button on this remote control
are assigned as shown in the following table. Register the preset code under the desired device name
in "List of preset codes" (vpage 205).
Preset codes that can be registered to CBL/SAT, Blu-ray, GAME,
MEDIA PLAYER, DVD, AUX1, AUX2, and CD buttons
Default preset
Button
mode
CBL/SAT group
VCR/PVR group
BD/DVD group
CBL/SAT group
VCR/PVR group
BD/DVD group
Audio group
CBL/SAT group
VCR/PVR group
BD/DVD group
AVR
CBL/SAT group
VCR/PVR group
BD/DVD group
Audio group
CBL/SAT group
VCR/PVR group
BD/DVD group
Audio group
Audio group
• When you press an input source select button for which a preset code has been registered, its button
name appears on the display of the remote control unit.
• To unregister the device from a button and reset to the default setting, set the AVR code "73347" to
the button.
158
Registering preset codes
Available change to preset