Denon AVR-4520CI Owner's Manual page 125

Setting items
Low Frequency Effects n When "Input Mode" (vpage 138) is set other than to "EXTERNAL IN"
Adjust the low-frequency
–10dB – 0dB
effects level (LFE).
n When "Input Mode" (vpage 138) is set to "EXTERNAL IN"
0dB / 5dB / 10dB / 15dB
For proper playback of the different sources, we recommend setting
to the values below.
• Dolby Digital sources : 0dB
• DTS movie sources : 0dB
• DTS music sources : –10dB
Center Gain 0.0 – 1.0
Distributes the dialogue
output from the center
channel to the front left and
right channels and widens
the sound image in the
front. You can set this when
the sound mode is set to
DTS NEO:X.
Panorama On : Set.
Assign front L/R signal also Off : Do not set.
to surround channels for
wider sound. You can set
this when the sound mode
is Dolby PLg in the "Music"
mode.
Dimension 0 – 6 (3)
Shift sound image center
As you set a smaller number, the surround sound field shifts backward;
to front or rear to adjust
as you set a larger number, the surround sound field shifts forward.
playback balance. You can
set this when the sound
mode is Dolby PLg in the
"Music" mode.
DVD
Setting details
122
Setting items
Center Width 0 – 7 (3)
Distributes the dialogue
The smaller the value, the more dialogue is concentrated on the center
output from the center
channel. The larger the value, the more dialogue is distributed to front
channel to left and right
left and right channels, and the more the sound image widens in the
channels and widens the
front.
sound image in the front.
You can set this when the
sound mode is Dolby PLgx
in the "Music" mode.
Delay Time 0ms – 300ms (30ms)
Adjust the audio delay time
against video to extend the
sound field image. You can
set this when the sound
mode is "MATRIX".
Effect Level 1 – 15 (10)
Adjust the sound effect
Set to a lower level if the positioning and sense of phase of the
level. You can set this when
surround signals seems unnatural.
the sound mode is original
listening mode.
Room Size Small : Simulate acoustics of a small room.
Determine size of acoustic Medium small : Simulate acoustics of a medium-small room.
environment. You can set Medium : Simulate acoustics of a medium room.
this when the sound mode Medium large : Simulate acoustics of a medium-large room.
is original listening mode. Large : Simulate acoustics of a large room.
NOTE
"Room Size" does not indicate the size of the room in which sources are
played.
Audio
Setting details
v See overleaf