Auto Standby; Front Display - Denon AVR-4520CI Owner's Manual

Auto Standby

When you do not perform any operation on this unit with no audio or video input for a specified time,
this unit automatically enters the standby mode. Before it enters the standby mode, "Auto Standby" is
displayed on the display of this unit and the menu screen.
60min : The unit goes into standby after 60 minutes.
30min : The unit goes into standby after 30 minutes.
Off : The unit does not go into standby automatically.

Front Display

Makes settings related to the display on this unit.
Setting items
Dimmer Bright : Normal display brightness.
Adjust the display Dim : Reduced display brightness.
brightness of this unit. Dark : Very low display brightness.
Off : Turns the display off.
Buttons on the main unit can be used for operations.
Each time
below.
NOTE
When "Dimmer" is set to "Off", the display turns off and appears as if
there is no electricity.
Channel Indicators Input : Uses the input signal display for the channel indication on the
Sets whether to use the display.
input signal display or Output : Uses the output signal display for the channel indication on the
output signal display for the display.
channel indication on the
display.
DVD
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
DIMMER
is pressed, the setting is changed as shown
Bright Dim
Off Dark
Information
Show information about receiver settings, input signals, etc.
NOTE
This item is not compatible with the HDMI ZONE4 function.
Items
Audio Sound Mode : The currently set surround mode.
Show information about Input Signal : The input signal type.
audio input signals. Format : The number of input signal channels (presence of front, surround,
LFE).
Sample Rate : The input signal's sampling frequency.
Offset : The dialogue normalization correction value.
Flag : This is displayed when inputting signals including a surround back
channel. "MATRIX" is displayed with Dolby Digital EX and DTS-ES Matrix
signals, "DISCRETE" with DTS-ES Discrete signals.
This function is automatically activated when playing Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS and DTS-HD sources.
It automatically corrects the standard signal level for individual program
sources.
The correction value can be checked using the
The figure is the corrected value. This cannot be changed.
Video HDMI Signal Info.
Show information about • Resolution / Color Space / Pixel Depth
HDMI input/output signals
HDMI Monitor 1 / HDMI Monitor 2
and HDMI monitors.
• Interface / Resolutions
153
Setting details
Dialogue normalization function
STATUS
on the main unit.
Dial.Norm
Offset - 4dB
General