Operating External Devices With The Remote Control; Registering Preset Codes - Denon AVR-4520CI Owner's Manual

Operating external devices with the remote control

By registering preset codes for external devices to the provided remote control, you can operate your TV and playback devices (such as Blu-ray Disc player and DVD player) with the remote control.

Registering preset codes

When preset codes are registered in the included remote control unit,
it can then be used to operate any devices you have, such as DVD
players or TVs made by different manufacturers.
n Buttons used for operating the devices
DEVICE X
q
For switching power of each device on or off.
uio p ENTER BACK
, ,
w
For menu operation of each device.
MENU INFO OPTION, SETUP
, ,
e
For displaying the menu of each device.
8 9 1 6 7 3 2
, , , , , ,
r
0 9 +10
t Number button ( – , )
CH/PAGE df
y
TV X TV INPUT
,
u
For operating a TV
This button is enabled in any mode.
For details on operation with the remote control unit, see pages
46, 49, 58, 61, 65, 68, 71, 73, 75, 161, 162.
NOTE
TUNER
The preset code cannot be registered to
NETWORK INTERNET RADIO
and .
DVD
Registering preset codes
1
Press and hold
least 3 seconds.
"SETUP" and
twice on the remote control unit.
2
When "PRSET" appears on
the remote control unit, press
ENTER
.
3
When "DEVIC" appears on the
remote control unit, press the
input source select button of
the AV equipment (
Blu-ray , GAME
DVD AUX1
, ,
you want to program for the
preset setting.
PHONO iPod/USB
, , , NOTE
Note that the group numbers that can be
registered are predefined for each input
source select button (vpage 158).
RC SETUP for at
indicator flashes
CBL/SAT
,
, MEDIA PLAYER ,
AUX2 CD
or ) that
157
4
When "– – – – –" appears on the remote control unit,
press the number buttons 0 – 9 to enter a 5-digit code
(vpage 205 "List of preset codes").
Press the buttons with an interval less than 30 seconds.
• When the code is registered
! "OK" flashes four times on the remote control unit.
• When the code is not registered correctly
! "FAIL" or "CANCL" flashes four times on the remote control
unit.
Perform from step 1 again.
Some manufacturers use more than one type of remote control code.
Preset codes to change the number and verify correct operation.
NOTE
Depending on the model and year of manufacture of your device,
some buttons may not operate.