Auto Standby - Denon AVR-X250BT Owner's Manual

Contents Connections
o Pow.On Default
Set the mode to ECO when the power is on.
Last
(Default):
On:
Auto:
Off:
Front panel Display
Playback
The ECO Mode will be set to the previous
setting before the power was switched
off.
When power is turned on, the mode will
always be switched to the "ECO Mode" in
"On".
When power is turned on, the mode will
always be switched to the "ECO Mode" in
"Auto".
When power is turned on, the mode will
always be switched to the "ECO Mode" in
"Off".
Rear panel
Settings
o Auto Standby
Set so the unit power automatically switches to standby.
Sets the time for switching to auto standby when there are no audio or
video signals input into this unit.
Before the unit enters standby mode, "Auto Standby" is displayed on
the unit display and the menu screen.
60 min:
30 min:
15 min
(Default):
Off:
88
Remote
Tips Appendix
The unit goes into standby after 60 minutes.
The unit goes into standby after 30 minutes.
The unit goes into standby after 15 minutes.
The unit does not go into standby
automatically.
Index