Default Settings and Technical Specifications
This appendix provides the factory default settings and technical specifications for the ProSafe
SSL VPN Concentrator 25 SSL312.
Factory Default Settings
You can use the push button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset.
•
To perform a hard reset, push and hold the Factory Defaults button for approximately 5
seconds, until the TEST light turns on. Your device will return to the factory configuration
settings shown in
Table A-1. SSL312 Default Configuration Settings
Feature
Management Login
User Login URL
User Name (case sensitive)
Login Password (case sensitive)
Ethernet Port 1
IP Address
Subnet Mask
Port Speed
Gateway Address
Ethernet Port 2
IP Address
Subnet Mask
Port Speed
Gateway Address
Default Settings and Technical Specifications
Table A-1
below.
v2.1, November 2008
Description
192.168.1.1
admin
password
192.168.1.1
255.255.255.0
10/100
0.0.0.0
10.0.0.1
255.0.0.0
10/100
0.0.0.0
Appendix A
A-1