Logging In; Basic System Settings - NETGEAR WMS5316 - ProSafe 16-AP Wireless Management System Reference Manual

ProSafe 16 AP Wireless Management System WMS5316 Reference Manual

Logging In

Note: For help installing the ProSafe 16 AP Wireless Management System, see the
Installation Guide included in the package and on the Resource CD.
To log in to the Wireless Management System you must use a computer that is configured with a
static IP address of 192.168.0.210 and a subnet mask of 255.255.255.0. Connect the computer to a
LAN port on the Wireless Management System with an Ethernet cable.
1. In the address field of your Internet browser, type the IP address for the ProSafe 16 AP
Wireless Management System. Its default IP address is http://192.168.0.250.
A login prompt displays:
Figure 1-1
2. If you are logging in for the first time, use the default user name admin and password
(password).
NETGEAR recommends that you change the password to a new, more secure password and
record it in a secure location.
The user interface opens with the Configuration Tab selected. This tab is shown in the
following section

Basic System Settings

When you log in, the Configuration tab displays General Settings.
1-2
"Basic System Settings."
v1.0, March 2010
Getting Started