Package Contents; Hardware Features; Front Panel Ports And Status Leds - NETGEAR STM150 Appliance Reference Manual

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
Note: When you reset the STM to the original factory default settings after you have
entered the license keys to activate the STM (see
NETGEAR" on page
different types of licenses that are available for the STM are no longer displayed
on the Registration screen. However, after you have reconfigured the STM to con-
nect to the Internet and to the NETGEAR registration server, the STM retrieves
and restores all registration information based on its MAC address and hardware
serial number. You do not need to re-enter the license keys and reactivate the
STM.

Package Contents

The STM product package contains the following items:
• ProSecure Web/Email Security Threat Management Appliance STM150, STM300, or
STM600
• One AC power cable
• Rubber feet (4) with adhesive backing
• One rack-mount kit
• Straight through Category 5 Ethernet Cable
• ProSecure™ Web/Email Security Threat Management Applliance STM150, STM300, or
STM600 Installation Guide
• Depending on the model purchased, Service Registration Card with License Key(s)
• Warranty and Support Information Card
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the product for repair.

Hardware Features

The front panel ports and LEDs, rear panel ports, and bottom label of the STM models are
described below.

Front Panel Ports and Status LEDs

The front panels of the three STM models provide different components.
Introduction
2-28), the license keys are erased. The license keys and the
v1.0, September 2009
"Registering the STM with
1-7