Advertisement
Activate the Scanning Service Licenses
Note: Activating the service licenses initiates their term of use. Activate the licenses only
when you are ready to start using this unit. If your unit has never been registered before
you can use the 30 day trial period for all 3 types of licenses to perform the initial testing
and configuration.
1. If your unit included a license key
card, refer to it.
Be sure to store the license key
card in a secure location. Not only
will you need these keys to
activate your product during the
initial setup, but also to reactivate
the licenses if you ever have to
reset the unit back to its factory
defaults.
If you did not get a license key
card, have your license keys
available.
2. Register the licenses.
Note: Be sure the unit has Internet
access before registering the
licenses.
a.
Log in to the unit.
b. Select Support >
Registration to display the
Registration tab.
c.
Enter the first registration key and customer information. Then, click Register.
d. Repeat this step for the remaining keys. The unit will activate the licenses and
register with the NETGEAR support server.
Online Documentation and Support
Select Support > Documentation to
view the reference manual.
Select Support > Knowledge Base to
view the support page, which includes
this document and the reference
manual. Going to
http://www.netgear.com/support and
selecting your product model number
takes you to the same page.
Consult the reference manual for
instructions on how to use the online support remote diagnostics.
Technical Support
Thank you for selecting ProSecure® products.
After installing your device, locate the serial number on the bottom label of your product
and use it to register your product at http://www.NETGEAR.com/register.
Registration is required before you can use our telephone support service. The phone
numbers for worldwide regional customer support centers are on the Warranty and
Support Information card that came with your product.
Go to http://kbserver.netgear.com for product updates and Web support.
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union,
this product should be treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.
© 2009 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR and ProSeure logos are
registered trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product
names are trademarks or registered trademarks of their respective holders. Information is subject to change
without notice.
December 2009
Advertisement
