23. Tools Mode
Defaults for Copy
The DocuColor 2006 automatically restores default feature settings
•
When the power is switched on.
•
When restoring power from energy saver mode.
•
When the Clear All button is pressed.
To change the default settings for the following features, select the Defaults
for Copy option from the Administrator menu in Tools Mode:
•
Paper: This option allows you to change the default setting for the Paper
Supply feature.
The Paper Supply default can be set at Auto, Tray 1, Tray 2 or Tray 3.
The Paper Supply default cannot be Auto if the Reduce/Enlarge default
setting is Auto %.
•
R/E: This option allows you to change the default setting for the
Reduce/Enlarge feature.
The Reduce/Enlarge default can be set to Auto %, 100 %, or to any of
the Preset % options listed on the Copier Control Panel.
The Reduce/Enlarge default setting cannot be Auto % if the Paper Supply
default setting is Auto.
•
Density: This option allows you to change the default setting for the
Lighten/Darken feature.
The Lighten/Darken default can be set to Auto or any of the five density
levels between Darken and Lighten.
23–4
Xerox DocuColor 2006