Xerox 2006NPC - DocuColor Color Laser User Manual page 345

Rename
Hold
RIP and Hold
Print
Print and Hold
Process Next
Remove Raster
Override Print Settings
Thumbnail A
Thumbnail B
Xerox DocuColor 2006
Rename the job (PostScript or
PCL file with or without raster).
Hold the job in the current place
(except for a printed job, which is
moved to the Spool or RIP area).
RIP the job and hold it in the RIP
area.
Print the job in its turn (RIP it first
if it does not have raster data).
Keep the printed job in the Print
area until the job limit is reached.
Print the job in its turn (RIP it first
if it does not have raster data)
After printing, hold the PostScript
or PCL data and the raster in the
RIP area.
Give top priority to this job.
Print the job (or RIP and print) as
soon as the processor and copier
are free, before other waiting jobs.
Remove the raster from a job that
has raster data; leave the
PostScript or PCL job in place.
Change the print options for the
job.
Open the selected held raster
data job in the Thumbnail A
window where you can view a full-
screen preview of the job.
Open the selected raster data job
(not necessarily a held job) in the
Thumbnail B window for viewing.
18. Using Fiery WebSpooler
Unaffected, but associated
with the new name
Note: If the renamed job is
printed, the Job Log reflects
the original name of the job.
Held in RIP area indefinitely, if
included with job
Held in RIP area indefinitely
Temporarily held in RAM until
memory is needed for another
job
Held in the RIP area
indefinitely (saved to disk)
Held in RAM after printing (can
be selected in the Print area
while it remains there), or Held
in RIP area (saved to disk) if
destination was RIP and Hold.
Deleted
Deleted and regenerated, if
the newly selected options
require reRIPping, or reprinted
with the new settings, if none
require reRIPping.
Unchanged.
Unchanged
18–5