Problems With Print Quality - Xerox 2006NPC - DocuColor Color Laser User Manual

Network Problem Solving

Problems with print quality

If this happens:
Print settings for your job output
do not match the settings you
gave.
You get poor printing results.
Separations do not combine
properly.
The registration or colors of an
image are not what you
expected.
Xerox DocuColor 2006
Try this:
Ensure that you did not override the
setting for the job in another place.
For information about options and
overrides, refer to the chapter
options.
Does your application require one of
the DocuColor 2006 Printer
description files?
If you are printing from Adobe
PageMaker, ensure that the
DocuColor 2006 Printer description
file is installed correctly.
Ensure the system has been
calibrated.
Ensure that the file was initially
created as separations.
If you are printing separations or a
DCS format file, set the Combine
Separations print option to ON.
With Combine Separations ON, all
four colors will be printed on a single
page; with Combine Separations Off,
four black-and-white pages will print
to simulate four single-color plates.
Ask the operator to print a test page.
The problem may be with the Printer. If
your test page shows that the Printer is
working properly, correct the problem
within your application software. If the
test page is wrong, your Printer may
need to be calibrated or adjusted in
some other way.
24. Problem Solving
Print
24-59