Printing From The Windows Workstations - Xerox 2006NPC - DocuColor Color Laser User Manual

Docucolor 2006 user guide
Hide thumbs Also See for 2006NPC - DocuColor Color Laser:
Table of Contents

Advertisement

14
Use the following instructions to set up options and print from one of
the following operating systems:
For more information, refer to the chapter Print options.
Your screens may vary from those illustrated in this chapter.
This chapter describes printing to the DocuColor 2006 from Windows
95/98, Windows 2000, and Windows NT 4.0. You can print from a
networked Windows computer, a computer using Windows (WINS)
printing, or a Windows computer connected to the parallel port on the
printer. If you plan to print files at another location, follow the
procedures described in the section Saving files to print at a remote
location in this chapter.
Another way to print from a Windows computer is to download PCL,
PostScript, Encapsulated PostScript (EPS), or Portable Document
Format (PDF) files using WebDownloader. Basic instructions are
provided at the end of this chapter.
For information on connecting to the printer over the network, installing
printer drivers, and installing the Fiery utilities, refer to the appropriate
Windows installation chapter.
Xerox DocuColor 2006
Windows 95
Windows 98
Windows 2000
Windows NT 4.0
Printing from the Windows
workstations
14–1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docucolor 2006

Table of Contents