Printing From An Application - Xerox 2006NPC - DocuColor Color Laser User Manual

5. Select Printer Specific Options and specify the appropriate
settings for your print job.
These print options are specific to the DocuColor 2006. You may
need to use the scroll bar at the right of the box to see all options.
They override the settings in Printer Setup, but can be changed
from the Fiery WebSpooler. For information about these options,
refer to the chapter Print options.
Ensure that your selections are within the paper specifications for the printer.
Refer to the chapter Technical information for more information.
If you select Printer default, the job prints according to the
settings entered during Setup, or the default settings. For
information about these options, refer to the chapter Print options.
Some PPD options can also be set from an application (for
example, Reverse Order printing or Collation). In these cases,
use the PPD option to perform the function, rather than setting it
from the application. The application may not set up the file
properly for printing and may also take longer to process.
If you specify incompatible print settings, a dialog box may
appear. Follow the on-screen instructions to resolve the conflict
6. If you want to make the new settings the default settings, select
the Save Settings button.
7. Select Print.
The DocuColor 2006 does not support printing the Cover Page from the
Adobe PS printer driver.

Printing from an application

Although printing may vary slightly within applications, the general
procedure is as follows:
1. After you have created a document, select Print from the File
menu.
2. Select the DocuColor 2006 from the Printer drop-down menu
and select printing options.
3. Select OK to print the job.
Xerox DocuColor 2006
15. Printing from the Macintosh OS workstations
15–5