Setting Up The Docucolor 2006 As A Postscript Printer - Xerox 2006NPC - DocuColor Color Laser User Manual
Docucolor 2006 user guide
Hide thumbs
Also See for 2006NPC - DocuColor Color Laser:
- Manual (27 pages) ,
- Maintenance manual (19 pages) ,
- Use manual (9 pages)
Table of Contents
Advertisement
12. Installing user software in a Macintosh OS environment
Setting up the DocuColor 2006 as a PostScript printer
To set up the DocuColor 2006 as a PostScript printer, install the
PostScript printer description file (PPD) that corresponds to the printer.
The PPD files are provided on the User Software CD.
Printer drivers provide a way to communicate information on print jobs
between your applications, the DocuColor 2006, and any other
PostScript printer connected to your workstation.
Use the following procedures whether you are installing from the User
Software CD or installing with printer files previously downloaded using
the Installer WebTool.
Before you begin, print a Configuration Page for the printer. For
specific procedures, refer to the chapter Performing the setup from the
Printer Control Panel.
1.
Perform one of the following:
• Insert the User Software CD in your CD-ROM drive and open
the English: Printer Driver folder.
• To install from files you downloaded using the Installer
WebTool, open the Printer Driver folder on your hard disk.
2.
Double-click the AdobePS 8.6 Installer icon.
A Warning dialog box is displayed.
12–2
Xerox DocuColor 2006
Advertisement
Table of Contents
