Using Saved Settings (Windows 95/98 And Windows Nt 4.0); Creating Saved Settings; Loading Saved Settings - Xerox 2006NPC - DocuColor Color Laser User Manual
Docucolor 2006 user guide
Hide thumbs
Also See for 2006NPC - DocuColor Color Laser:
- Manual (27 pages) ,
- Maintenance manual (19 pages) ,
- Use manual (9 pages)
Table of Contents
Advertisement
Using saved settings (Windows 95/98 and Windows NT 4.0)
Print option settings can be saved on your hard disk so you can easily
load specifically configured settings for a particular job. Settings files
can also be shared over a network, using the Import and Export
features.
Although the user interface differs slightly, the following procedures are the
same for both PostScript and PCL drivers, in Windows 95/98 and Windows
NT 4.0. The following examples show the Windows 95/98 PostScript driver.
This feature is not supported by Windows 2000.
Creating Saved Settings
1.
Ensure that the Default Settings are displayed in the Saved
Settings drop-down list.
As soon as you change any settings, the Saved Settings menu
displays Untitled instead of Default Settings.
2.
Select the Save current setting button (the disk icon).
3.
Enter a Settings Name and select OK.
Loading Saved Settings
1.
Ensure that the Default Settings are displayed in the Saved
Settings drop-down list.
2.
Select the settings you want to use.
The options are automatically configured with the saved settings.
Xerox DocuColor 2006
14. Printing from the Windows workstations
14–9
Advertisement
Table of Contents
