13. Installing the Fiery software for Windows and Macintosh
3.
Enter the IP Address and subnet to search. Select the arrow
button.
The IP address and subnet to be searched are displayed in the IP
range/Subnet Addr list. Repeat this step for each IP address and
subnet you would like to search.
To remove a subnet value from the list, select the value and
select the Remove button.
4.
Select Search.
When the search is complete, all found printers are displayed in
the Available Fierys area of the dialog box.
If the printer was not found and you would like to search again
using the same parameters, select Refresh.
13–10
Xerox DocuColor 2006