1. Setting up the DocuColor 2006
Checking the installation components
Ensure that all of the components you ordered are available before you begin
the installation. All of the components are listed below.
•
Printer
•
Scanner
•
Scanner Stand
•
Duplex Tray (optional)
•
2 Tray Module (optional)
You may need a phillips head and a flat blade screwdriver in order to
perform the installation of the DocuColor 2006.
Following the instructions ensures that the DocuColor 2006 components are
installed in the following order:
1.
2 Tray Module, if ordered
2.
Printer
3.
Duplex Tray, if ordered
4.
Scanner Stand
5.
Scanner
6.
Accessories, if ordered
7.
Client Software (customer installed)
The first step
If the DocuColor 2006 was installed for you, go to
the Xerox DocuColor
If you ordered the optional 2 Tray Module, go to the
Module
procedure.
If you do not have a 2 Tray Module, go to the
1-4
2006.
Preparing for the installation
Chapter 2. Getting to know
Installing the 2 Tray
Upacking the Printer
Xerox DocuColor 2006
procedure.