Copy Defaults - Xerox 2101 User Manual

■

Copy Defaults

You can set the default values of the copy features.
The settings of the machine will return to the default values set here when the power is switched on;
when the machine recovers from the Power Saver mode; or when the Clear All button is pressed. So
if you specify the settings or values of frequently used features as the default values, there is no need
to change these values whenever you need to use them.
Item
Paper Supply Specify the default value of Paper Supply on the Basic
Features screen.
Paper Supply cannot be set to Auto when the setting
of Reduce/Enlarge is Auto%.
This default value is also applicable to the Body
Pages Tray of Covers on the Output Format screen.
However, if you select Auto here, the default value for
the Front/Back Cover Tray of Covers will be the first
priority tray. (The first priority tray is usually tray 1, or
the optional tray 6 (HCF) if it is installed.)
Covers Specify the default value of the tray for Covers on the
Output Format screen.
Booklet Creation Specify the default value of the tray for Booklet
Creation on the Output Format screen.
Reduce/Enlarge Specify the default value of Reduce/Enlarge on the
Basic Features screen.
Nine preset ratios are displayed there for your
selection. Out of the nine ratios, three (100%, Auto%,
and 50%) are fixed but you can choose to display any
other six ratios from a list of 20 from R/E Presets of
Tools Mode.
Auto% cannot be selected here if the default value for
Paper Supply is Auto.
Original Type Specify the default value of Original Type on the
Image Quality screen.
Text & Photo Specify the default value of Text & Photo of Original
Type.
Photo Type Specify the default value of Photo of Original Type.
Text Type Specify the default value of Text of Original Type.
Lighter/Darker Specify the default value of Lighter/Darker on the
Image Quality screen.
Density Control Specify the default values of the three density levels
(high, medium, and low) of Density Control on the
Image Quality screen.
Sharpness Specify the default value of Sharpness on the Image
Quality screen.
Margin Shift Specify the default values of Margin Shift (Side 1 and
(Side 1) Side 2) on the Added Features screen.
Margin Shift
(Side 2)
Description
8.2 Overview of Tools Mode
Available options
Auto*, tray 1, tray 2, tray 3,
tray 4,
tray 6 (HCF) (optional)
Tray 1, tray 2*, tray 3, tray 4,
tray 6 (HCF) (optional), tray 7
Tray 1, tray 2*, tray 3, tray 4,
tray 6 (HCF) (optional), tray 7
100%*, Auto%, 50%, 141%,
122%,115%, 86%, 81%,
70%, 25%, 35%, 64%, 78%,
97%, 127%, 129%, 154%,
180%, 200%, 220%, 282%,
400%
Text & Photo, Text*, Photo,
Map
Halftone*, Photograph, Light
Text
Halftone*, Photograph
Normal Text, Pencil Text
(Black)
Auto*,
Lightest-Normal-Darkest
(7 levels)
Low Density: -3 to 0* to +3
Medium Density: -3 to 0* to +3
High Density: -3 to 0* to +3
(7 levels each)
Softer to Normal* to Sharper
(5 levels)
No Shift*
Auto Center
Corner Shift
Variable Shift
297