More About Print Options; Black Overprint - Xerox 2006NPC - DocuColor Color Laser User Manual

Spot Color Matching
Off/On

More about print options

The following sections provide additional information about print
options. See the table above for information on the settings,
requirements, and constraints in effect for these options.

Black Overprint

When printing black text in combination with a color background or
graphics, the text can be printed in one of two ways: either as part of
the color background, or on top of the color background. Black
Overprint allows you to select a specific way to print the black text for
such a job.
•
Off—Prints the black text with knockouts. The DocuColor 2006
first prints the color background with the black text areas knocked
out (no color is printed in the text areas); the black text is then
printed in the knocked out area, filling in the areas not printed in
color. The result is a flatter appearance for the black text.
• On—Overprint the black text. Used in combination with the Pure
Black Text/Graphics option, the DocuColor 2006 first prints the
full color background, then lays the black text on top of the color
background as 100% K dry ink. The result is a darker and glossier
appearance for the black text. Overprinting also minimizes
misregistration and 'haloing' problems.
Xerox DocuColor 2006
Select Off to print specified
PANTONE colors in your job
using the current
CMYK Simulation and CMYK
Simulation Method.
Select On to activate the
PANTONE Lookup Table. The
printer uses specified
PANTONE colors in your job
by matching the CMYK print
blend to the same color from
the PANTONE library.
B. Print options
For Windows, select Expert
Color as the Color Mode to
access this option.
This option is not available for
PCL printing.
B–9