Top-Level Menus - Xerox 2006NPC - DocuColor Color Laser User Manual

7. Performing the setup from the Printer Control Panel
3. Perform one of the following:
•
•
•

Top-level menus

When the printer is not processing or printing a job, the control panel
displays Ready or Power Saver Mode. To view the top-level menu
choices, including the following, press the Menu button.
Select
System Setup
Printer Setup
PS Setup
PCL Setup
I/O Port Setup
Network Protocol Setup
Network Services Setup
Check and Print
Print Pages from List
Other Panel Language
Resets
System Setup to
Network Services Setup
VisualCal
Color Adjustment
7–2
To advance through the menus, press the Menu button.
To view submenus, press the Item/Enter button.
To accept a displayed option, press the Item/Enter button.
System settings for the printer; set or change the
administrator password used to limit access to the
Setup menus.
Printer settings
PostScript settings for the printer
PCL settings for the printer
Settings for the network and/or parallel connections to
the printer
Settings for the network protocols
Settings for the printing services
Print remaining copies or processed jobs stored on the
printer disk after first copy has been inspected.
The resident pages of the printer.
The Printer Control Panel language.
Job Log and all print queue clearance (Clear
Log/Queues displayed)
Formatting the hard drive (Format Disk displayed)
Printer color calibration reset to factory settings (Reset
Color displayed)
Defaults of all modifiable settings (Restore Defaults)
Restart of the printer (Restart Printer displayed)
Information about the printer and to set a password to
limit access to printer Setup menus.
Calibration of the printer color production.
Adjustment of the density and brightness of Dry Ink.
To specify
Xerox DocuColor 2006