Making A Test Copy From The Scanner - Xerox 2006NPC - DocuColor Color Laser User Manual
Docucolor 2006 user guide
Hide thumbs
Also See for 2006NPC - DocuColor Color Laser:
- Manual (27 pages) ,
- Maintenance manual (19 pages) ,
- Use manual (9 pages)
Table of Contents
Advertisement
1. Setting up the DocuColor 2006
Making a test copy from the Scanner
For a quick overview of the Scanner Control Panel, refer to
the DocuColor
1.
Ensure that READY is displayed on the Printer Control Panel screen.
2.
Lift the Scanner cover and place an original on the Document Glass.
3.
Press the Copy button to enter Copy mode.
4.
Press the Start button on the Scanner Control Panel.
After a moment the copy is delivered to the Output Tray on the top of the
Printer.
5.
Remove the original from the Document Glass.
The next step
Perform one of the following steps:
•
If you are adding memory to the Printer, go to the
Printer
•
If you are adding memory to the Scanner, go to the
the Scanner
•
If you are not adding memory, go to
2006.
1-72
2006.
procedure.
procedure.
Printing the Test Page
Getting to know
Copy button
Start button
Adding memory to the
Adding memory to
Getting to know the DocuColor
Xerox DocuColor 2006
301003
Advertisement
Table of Contents
