Loading Envelopes In The Bypass Tray - Xerox 2006NPC - DocuColor Color Laser User Manual

22. Copy Features

Loading Envelopes in the Bypass Tray

All envelopes must be fed through the Bypass Tray. Open the flap and insert
the envelope, one at a time, into the Bypass Tray as shown below.
Follow these guidelines when printing onto envelopes to help minimize
potential jams and other problems:
22–10
•
Do not use envelopes that have tape seals. If you are using
an envelope with a glue seal, make sure it is dry before use.
•
Only use landscape (horizontal) type envelopes (more than
90 mm wide, and more than 143 mm long with the flap
open). Portrait (vertical) type envelopes may not be used.
•
Insert envelopes with the flap facing out and the glue side
down.
•
Poor quality envelopes may crease, and may not print
properly.
0302508A- W O L
Xerox DocuColor 2006