2.
Enter the DNS name or IP address of the printer and select the
arrow button.
After the arrow button is selected, Fiery Link checks for the
specified server. If the server is found, it is displayed in the My
Fiery List. If it is not found, an error message is displayed.
3.
To give the server a nickname, select it in the My Fiery List and
select Modify.
4.
Select Use Nickname and enter a nickname for the printer.
5.
Select OK.
6.
Select Apply to accept the changes to My Fiery List.
7.
Select OK.
Xerox DocuColor 2006
13. Installing the Fiery software for Windows and Macintosh
13–5