Xerox 2006NPC - DocuColor Color Laser User Manual page 508

24. Problem Solving
If this happens:
Your printed file appears too
dark.
Color output is incorrect.
Color file prints in black and
white.
Desktop Color Separations
(DCS) format images print
incorrectly.
QuickDraw fill patterns print as
solids.
24-60
Try this:
Adjust the Brightness option.
Use the Brightness option when
printing from an application to lighten
your image whenever you print a
PostScript or Encapsulated PostScript
(EPS) file.
Check with the operator or
administrator about the current
calibration information.
The Printer may need recalibration. t.
In the Color Matching dialog box, make
sure that Color/Grayscale or ColorSync
Color Matching or PostScript Color
Matching is selected (not Black and
White).
Ensure that the Color Mode print option
is set to CMYK or Standard
Color/Expert Color (Windows 95/98 or
Windows 2000) and not Grayscale.
Ensure that you selected the correct
options to send separations in the
application Print dialog box.
Ensure that you have the file for
every layer of separation that you are
printing.
Set the Combine Separations option
to On.
This combines the high-resolution
files for an image and prints them.
With Combine Separations Off, the
low-resolution master file will print.
Use the Adobe PostScript Printer driver
(or the Apple LaserWriter 8.3 or later
Printer driver.
Network Problem Solving
Xerox DocuColor 2006