Detect Doc Size - Xerox 2006NPC - DocuColor Color Laser User Manual
Docucolor 2006 user guide
Hide thumbs
Also See for 2006NPC - DocuColor Color Laser:
- Manual (27 pages) ,
- Maintenance manual (19 pages) ,
- Use manual (9 pages)
Table of Contents
Advertisement
Detect Doc Size
The DocuColor 2006 can automatically detect the size of an original if it is a
certain size. The copier measures original document sizes in millimeters or
in inches.
For a complete list of all paper sizes the DocuColor 2006 can automatically
detect, go to the Basic Copying chapter.
Use the following procedure to set the default unit of size:
1.
Press the Tools button to display the Tools Main Menu on the Copier
Screen.
2.
Using the Arrow Buttons highlight the Admin Menu option.
3.
Press the Select button. Password Input is displayed on the Copier
Screen.
4.
Using the Numeric Keypad, enter your Administrator Password. The
numbers display as asterisks (*).
If you make a mistake while entering a password, press the Clear (C) button.
5.
Once the correct password is entered, the Administrator Menu is
displayed on the Copier Screen.
6.
Use the Arrow Buttons to highlight the Detect Doc Size option.
7.
Press the Select button. Unit of Size selection is displayed on the Copier
Screen.
8.
Using the Arrow Buttons highlight the desired unit of measurement: mm
(millimeters) or inch (inches).
9.
Press the Select button. The Administrator Menu is displayed on the
Copier Screen.
10. Press the Exit button. The Tools Main Menu is displayed on the Copier
Screen.
11. Press the Tools button to exit Tools Mode.
Xerox DocuColor 2006
23. Tools Mode
23–11
Advertisement
Table of Contents
