Installing The User Software For Parallel Port Printing (Windows Nt 4.0) - Xerox 2006NPC - DocuColor Color Laser User Manual

Installing the user software for parallel port printing
(Windows NT 4.0)
Use this procedure to install the printer. It prepares your system for
local printing through the parallel port.
Before you begin, print a Configuration Page for the printer. For
specific procedures, refer to the chapter Performing the setup from the
Printer Control Panel.
If you have previously installed a print driver for the DocuColor 2006,
perform the uninstall procedure before installing the new driver. For more
information, refer to your Windows documentation.
1. Insert the User Software CD in your CD-ROM drive.
2. Select Start, Settings, and Printers.
3. Double-click Add Printer to display the Add Printer wizard.
Select Next.
4. To install a printer locally, select My Computer and select Next.
My Computer is available if you logged in to a workstation on
which you have Administrator privileges. If it is not available, add
a network printer and follow the procedure for adding a port.
Refer to the section Installing the user software for TCP/IP and
LPR printing for Windows NT 4.0 in this chapter.
Xerox DocuColor 2006
11. Installing user software in a Windows NT 4.0 environment
11–3