Xerox 2006NPC - DocuColor Color Laser User Manual page 554

B. Print options
Media Type (Paper Type)
Plain Paper /Transparency/
Cover/Glossy/Coated/Labels/
Heavyweight/Card/Envelope/
Side 2 Plain Paper/Side 2
Cover/Side 2 Coated/Side 2
Glossy/Side 2 Heavyweight
Mirror
On/Off
Negative
On/Off
Orientation
Portrait/Landscape
Output
Top Output Tray (Face-
Down)
Side Output Tray (Face-Up)
Output Profile
Printer default/
Output-1/Output-2/
Output-3/Output-4/Output-5/
Output-6/Output-7/Output-8/
Output-9/Output-10
B–6
Select Transparency if you will
be printing on transparencies.
Select Transparency
Interleave to print multiple
transparency sheets with a
blank, plain paper sheet
inserted between each
transparency.
Select the Layout print bar and
the desired orientation. Select
the Mirror check box to print a
backward or mirror image of
the page or document.
Select the Layout print bar and
the Negative check box to
reverse colors in printing.
Select the Layout print bar and
specify whether the job should
be printed long-edge feed
(portrait) or short-edge feed
(landscape).
Select Off to print your
document on the top of the
paper.
Select On to print your
document on the bottom of the
paper (i.e., the document will
output from the copier with the
text facing down).
Specify the output profile to be
used for the current print job.
PCL supports only Normal
and Transparency.
Not available in Windows
NT 4.0
The Printer default setting
reflects the setting specified
in Printer Setup
The Printer default setting
reflects the setting specified
in Printer Setup.
The Media Type option must
be set to Plain Paper or
Heavyweight if Face-Down
Printing is set to On.
This option is not available for
PCL printing.
The Printer default setting
reflects the setting specified
in ColorWise Pro Tools.
For Windows, select Expert
Color as the Color Mode to
access this option.
More information follows this
table.
This option is not available for
PCL printing.
Xerox DocuColor 2006