19. Performing the setup from WebSetup
g.
h.
i.
Exiting Setup
After you have finished specifying Setup options, select OK and
close the Setup dialog box. You are notified that the server must
be restarted for the new settings to take effect and given the
choice to reboot now or later.
After you have completed Setup and rebooted the server for the
first time, install user software for printing on remote workstations.
Refer to the chapter Installing user software that is appropriate to
your system. To confirm the network connection and your Setup,
print a test job from a remote workstation.
19–24
Select Internal or Softfont (Internal) from the Font Source
drop down box. Internal fonts are built into printer memory
and are listed on the PCL font list. Soft fonts are fonts that
have been downloaded to the printer.
Use the scroll box to specify the Font Number to print. The
default is 0. For a complete list of available PCL fonts and
their corresponding font numbers, refer to the Fonts List.
Select a Paper Size for System Pages to set the size of a
print area on the paper, not the size of the paper itself.
System pages are printed from the Printer Control Panel.
Xerox DocuColor 2006