Setting Up The Docucolor 2006 In The Chooser - Xerox 2006NPC - DocuColor Color Laser User Manual

12. Installing user software in a Macintosh OS environment

Setting up the DocuColor 2006 in the Chooser

After you install the printer driver and ppd file, set up the DocuColor
2006 in the Chooser to take full advantage of its features.
1. Select Chooser from the Apple menu.
2. Ensure that AppleTalk is set to Active.
3. If necessary, select the AppleTalk Zone that contains your
printer.
4. Select the AdobePS icon.
The DocuColor 2006 is displayed in the Select a PostScript
Printer list in the form of <printer name>_<device name>_<print
connection>. The device name is the internal name of your
printer.
Only the print connections (Direct, Hold, and Print) that have been enabled
in Setup are displayed in the Chooser.
5. Perform one of the following:
• If Desktop printing is on, select a printer connection from the
Select a PostScript printer list and select Create. A printer
icon is created and displayed on the desktop.
• If Desktop printing is not on, select the Setup button.
The Adobe PS printer driver automatically selects the correct
PPD file for your DocuColor 2006.
You must set up each print connection separately. Repeat this step for all
enabled connections.
12–4
Xerox DocuColor 2006