Server Setup - Xerox 2006NPC - DocuColor Color Laser User Manual

Server Setup

In Server Setup, you can specify server settings; set, change or
remove server passwords; and specify job log page size and support
options.
1. Select the Server Setup button from the WebSetup screen to
display the Server Setup tabs.
Perform the following:
a.
Do not use the Device name (DocuColor 2006) as the server name. If you
have more than one server, be sure to assign them different names.
Windows NT 4.0 does not support two computers with the same name in the
same workgroup or domain.
b.
Xerox DocuColor 2006
Specify a default Server Name. This is the name that
displays in the Chooser on an AppleTalk network.
Select the Print Start Page check box to print a start page
each time the printer is restarted. The Start Page lists server
name, current date and time, amount of installed memory,
last calibration date, network protocols enabled, and print
connections published. To deselect the option, ensure there
is no check mark in the box (default).
19. Performing the setup from WebSetup
19–5