Installing User Software In A Windows 2000 Environment - Xerox 2006NPC - DocuColor Color Laser User Manual
Docucolor 2006 user guide
Hide thumbs
Also See for 2006NPC - DocuColor Color Laser:
- Manual (27 pages) ,
- Maintenance manual (19 pages) ,
- Use manual (9 pages)
Table of Contents
Advertisement
10
This chapter provides a brief overview and instructions for installing
software on Windows 2000 workstations. Ensure that your printer is
properly connect and configured for your network. For details, refer to
the chapters Connecting to the network and Performing the setup from
the Printer Control Panel.
Use the contents of this chapter as follows:
• Depending on your configuration, use one of the following sections
to install printer drivers and set up appropriate connections:
• Specify printer options with the section Setting the printer options.
• If necessary, refer to the section Installing additional software for
Windows 2000.
All necessary files are included on the User Software CD.
Xerox DocuColor 2006
• Parallel port printing
• TCP/IP and LPR printing (for a new installation or an upgrade
of Windows NT 4.0 to Windows 2000)
• IPX/SPX printing
• SPM printing
• SMB printing
Installing user software in a
Windows 2000 environment
10–1
Advertisement
Table of Contents
